325mm Automotive CNG Cylinder

325mm Automotive CNG Cylinder

The 325mm automotive CNG cylinder is available in variety of types classified according to the cylinder capacity. To illustrate, we can offer 40L automotive CNG cylinder, 45L CNG cylinder, 50L cylinder, and compressed natural gas cylinders with capacity of 55L, 60L, 65L, 70L, 80L, 90L, 100L, and 120L. Each of them comes with different cylinder length and weight, but the same wall thickness. The wall thickness is uniform in 4.9mm, which can perfectly avoid gas leakage and ensure safety. The length of our 120L automotive CNG cylinder is 1695mm and the weight is 87kg. The length of our 90L steel cylinder is 1315mm and the weight is 68kg. More detailed specifications are given in the following specification chart.

Quality of the 325mm Automotive CNG Cylinder
The steel tubes for making our CNG cylinder are acquired from Xingcheng Steel Corporation. We determine chemical composition of incoming raw steel materials for our steel tube production, so as to ensure that only materials with qualifying properties are accepted as raw materials. In addition, other materials for gas cylinder production including glass fiber, resin constituents, and quenching liquid are also acquired from trusted manufacturers.

Appearance Advantage of the 325mm Automotive CNG Cylinder
We have made substantial investments in acquiring steel tube materials with uniform thickness. Uniform cylinder wall thickness, coupled with our unique slightly saucer-shaped cylinder bottom and neck design, allows for effectively reduction in cylinder weight. So, while being used on vehicles, our CNG cylinder can assist in reducing energy consumption.

Usage Instruction on the 325mm Automotive CNG Cylinder
Our steel cylinder is designed for compressed natural gas storage. Each cubic meter of CNG, after dehydration, desulfuration, and other treatments, should contain no more than 8mg of water and no more than 20mg of hydrogen sulfide.

Chemical Composition of the Steel Material for 325mm Automotive CNG Cylinder Production
Material designation: 30CrMo
Composition C Si Mn P S P+S Cr Mo V Ni Cu
Content (%) 0.26- 0.34 0.17- 0.37 0.40- 0.70 ≤ 0.020 ≤ 0.020 ≤ 0.030 0.80- 1.10 0.15- 0.25 - ≤ 0.3 ≤ 0.2
Technical Specifications of the 325mm Automotive CNG Cylinder
Type Outer Diameter (mm) Capacity (L) Length excluding
valve (mm)
Weight (kg) Designed wall
thickness (mm)
Working
Pressure (MPa)
Material
CNG2-G-325-40-20B 325 40 670 36 4.9 20MPa 30CrMo
CNG2-G-325-45-20B 45 735 39
CNG2-G-325-50-20B 50 800 43
CNG2-G-325-55-20B 55 865 46
CNG2-G-325-60-20B 60 925 49
CNG2-G-325-65-20B 65 990 52
CNG2-G-325-70-20B 70 1055 55
CNG2-G-325-80-20B 80 1185 61
CNG2-G-325-90-20B 90 1315 68
CNG2-G-325-100-20B 100 1440 74
CNG2-G-325-120-20B 120 1695 87

As a specialized 325mm automotive CNG cylinder manufacturer in China, we also provide 356mm automotive CNG cylinder, 267mm steel gas cylinder, 279mm CNG cylinder, and 406mm automotive CNG cylinder.

Feedback Form
Other Products
  • 356mm Automotive CNG Cylinder The automotive CNG cylinder has an outer diameter of 356mm and wall thickness of 5.4mm. Made using 30CrMo, the 356mm CNG cylinder is durable and safe to use. According to the cylinder capacity, our 356mm automotive CNG cylinders are classified into a wide variety of types which all comes with varied length and weight. To illustrate, we can offer gas cylinders with capacity from 60L to 150L. Our 60L automotive CNG cylinder has a length of 800mm and weight of 54kg, our 70L CNG cylinder ...
  • 406mm Automotive CNG Cylinder We can offer 406mm automotive CNG cylinders with minimum capacity of 82L and maximum capacity of 200L. Each type of cylinder offers different length and weight. For instance, our 90L automotive CNG cylinder has a length of 910mm and weight of 76kg, our 110L CNG cylinder has 1075mm length and weighs 89kg, and our 145L compressed natural gas cylinder has a length of 1365mm and weighs 111kg...